Before you dismiss the headline, the availability number is not mine. It’s IBM’s.
All through my career, I’ve heard grey-beards talk of the fabled IBM Mainframe high-availability bar of “five nines” (no more than 5m16s of downtime in a year), so the assertion by IBM that “six nines” (no more than 7.9s of downtime in a year) could be achieved using the IBM Cloud (using Cloud Foundry) hooked me. Especially because with Heirloom, there was the high-probability that I could refactor a Mainframe COBOL/CICS application and execute it as a cloud-native application on the IBM Cloud.
Here’s IBM’s “how to” article: https://www.ibm.com/blogs/cloud-archive/2018/12/highly-available-applications-with-ibm-cloud-foundry/
As it turned out, following the article above was straightforward enough, and I refactored the COBOL/CICS application in about an hour to a cloud infrastructure that (by IBM’s calculations) would deliver a “six nines” SLA. Actually, if you round up IBM’s calculation, it’s “seven nines”, but I suppose some may view that pseudo-accounting as beyond the pale.
The basic design (from the article) is:
Two regions with two+ instances in each region with a global load balancer, providing an SLA availability of 99.999975%
Here’s a summary of the steps I took to complete the refactoring to a “six nines” infrastructure (prerequisites: an Heirloom Account and an IBM Cloud Account; installation of Heirloom SDK and IBM’s Cloud CLI tool).
The basic steps were: recompile, configure, package, set up cloud infrastructure, deploy & execute.
STEP 1: Recompile. Create a new project in the Heirloom SDK using the built-in “account” application. As soon as the project is created, it will automatically be compiled into 100% Java (this literally takes way less than 10 seconds), ready for deployment to any industry-standard Java Application Server (such as IBM Websphere Liberty).
STEP 2: Configure the deployment project. This is where I set up deployment information that tells the application things like how transactions ID’s relate to programs, and where the database is.
STEP 3: Package the application as a Java .war file — this is done using the built-in “Export Wizard” (again, this literally takes way less than 10 seconds). I now have an “account.war” package that contains everything I need to execute the application in exactly the same way as it used to run on the Mainframe. Only now, I can pretty much deploy it anywhere I choose. You already know where we’re going… to the IBM Cloud.
STEP 1: Setup. From the IBM Cloud Console, I needed to create 2 spaces within the organization (I named both “dev”). One space was located in the “US South” region, and the other space was located in the “US East” region.
As per the article, I needed to have at least 2 instances in each region to achieve the “six nines” SLA. With Cloud Foundry, the multiple instances are automatically load-balanced for you, so there is no need for any additional setup within each region.
However, to distribute workloads across multiple regions (i.e. not just within a region), I also needed a “Global Load Balancer”, which I set to the “glb.heirloompaas.io” domain.
STEP 2: Deploy. With the cloud infrastructure in place, I switched to the CLI to deploy the “account.war” package to the 2 regions hosting the application infrastructure. These steps were for the “us-south” region (and repeated for the “us-east” region).
$ ibmcloud login $ ibmcloud target -o email@example.com -r us-south $ ibmcloud target -s dev $ ibmcloud cf push account-us-south -p account.war
That’s it! Now the application is ready to run on the “six nines” infrastructure.
STEP 3: Execute. Out of the box, this particular application has 2 user interfaces.
The first is the existing 3270-style interface that will function and behave exactly as it did on the mainframe. There is no additional application code required here. Just the original application artifacts (such as COBOL source, data, BMS maps, etc).
You can quickly & accurately refactor IBM Mainframe applications to the IBM Cloud with Heirloom.
Those applications are cloud-native — which means they can seamlessly leverage the full power of the IBM Cloud (such as “six nines” availability).
I didn’t highlight scalability in this article, but it should be obvious that since this is a cloud-native infrastructure, the deployed application can dynamically scale-out.
By exposing the business rules (such as CICS transactions) as REST services, they can easily be consumed by other applications. In this article I used an Ext JS application to modernize the UI, but the same approach can also be used to connect a smart-device, such as an Amazon Echo, or refactor them as microservices.
Partnership enables modernization of legacy applications to cloud-native targets with new data sources and injection of AI and machine learning, without rewriting them
San Francisco, Calif. – February 5, 2020 – Splice Machine, a provider of a scalable SQL database that enables companies to modernize their legacy and custom applications to be agile, data-rich, and intelligent, today announced a new partnership with Heirloom Computing to enable enterprises to modernize legacy, mission-critical, mainframe applications with Splice Machine’s intelligent SQL database. Businesses will benefit by at least an order of magnitude, from reengineering applications by hand, to refactoring at compiler-speed to an agile Java ecosystem on a modern data platform. In addition, enterprises will gain access to powerful new functionality by running their applications on the Splice Machine platform, such as leveraging real-time and historical data in analytics and injecting AI and machine learning into their applications.
For decades, mission-critical mainframe applications have anchored the banking, insurance, healthcare, and retail industries, as well as the public sector, all of which require heavy-duty, low latency transaction processing, where downtime would be extremely costly and unacceptable. But mainframe applications are being left behind as businesses strive to transform using distributed computing and public clouds. In large part, this is due to the perception that it’s overwhelming, even impossible, to modernize a mainframe application.
“The perception that mainframes can’t be modernized is outdated and misguided,” said Monte Zweben, co-founder and CEO of Splice Machine. “With Heirloom Computing’s cloud-native refactoring solution combined with migration to our scale-out SQL database, the barriers to mainframe modernization are broken down, resulting in reduced costs, increased business agility and entirely new business outcomes through the infusion of AI and machine learning.”
Heirloom® automatically refactors mainframe applications so they execute on any cloud, while preserving critical business logic, user-interfaces, data integrity, and systems security. Replatforming is a fast and accurate compiler-based approach that delivers strategic value through creation of modern agile applications that utilize an open industry-standard deployment model that is cloud-native.
“After decades of working with customers to first build – and now refactor – mainframe applications, we have now reached a tipping point where the benefits of refactoring are essentially business-centric and not solely technical,” said Gary Crook, president and CEO of Heirloom Computing. “The partnership with Splice Machine gives those enterprises that have been on the fence about moving off the mainframe yet another compelling reason to act. Splice Machine’s unique combination of scale-out, SQL and in-database machine learning will help breathe new life and intelligence into their prized mainframe applications.”
Heirloom, in combination with Splice Machine, offers enterprises the fastest way to modernize mainframe applications, enabling them to scale out on commodity hardware and leverage more modern, analytical techniques using an intelligent, SQL platform with in-database AI and machine learning.
Serverless computing offers incredible agility. In these environments, you can truly focus on building the application without the need to design, procure, deploy & manage an application infrastructure. Outside of the cloud, that takes a lot of work. Making it highly-available and able to scale out & back on-demand, makes the task an order of magnitude more complex (and expensive).
Jules Winnfield may think there’s no way for your trusted mainframe applications to exploit a serverless compute platform, but he would be wrong (not sure I’d tell him that though). Below, I will show you how it can be done, and you may even be surprised at how fast & easy it is. Of course, this is a demo, so the workload is pretty small, i.e. for illustration, but we have many clients where the workload is in the multi-thousand MIPS range.
Because we can deploy to cloud-native scalable platforms, the size of the workload is not typically a major factor for the transformation project.
Here’s how it’s done. Recompile, package, setup, deploy & execute.
The key steps here involve using the Heirloom SDK to recompile the COBOL/CICS application into Java and packaging it into a .war package so it can be deployed to any industry-standard Java Application Server. I covered this in a previous article that targeted the deployment to Pivotal Cloud Foundry, so I won’t repeat the steps here.
STEP 1: Setup. Setting up a new application in GAE is very easy.
STEP 2: Deploy. We’re going to use the Google Eclipse plugin to login to our Google Cloud Account, select the application project (that we setup above), point it at the “account.war” package that we created using the Heirloom SDK, and deploy.
As soon as the deploy button is hit, the plugin creates a Google App Engine environment for our application. The specification for the environment is contained within the “app.yaml” file, which for this demo, looks like this:
runtime: java env: flex handlers: - url: /.* script: this field is required, but ignored env_variables: JETTY_MODULES_ENABLE: websocket network: session_affinity: true
The key items in this specification are “runtime: java” (i.e. give me an Eclipse Jetty instance) and “env: flex” (i.e. give me instances that are provisioned as Docker containers). The other item worth mentioning is “network: session_affinity: true”. This provides “sticky sessions” between the application client (which will be a web browser) and the application. Since online CICS mainframe applications are pseudo-conversational, maintaining the relationship between the client and multiple transactions within the same session is a requirement.
Once the deployment process is complete, a URL for the deployed service will be provided.
STEP 3: Execute. Simply grab the URL and point your browser at it.
… enter 1, and …
Obviously, there’s a lot of other capabilities built-in here, such as remote debugging, application monitoring, etc. With web applications, it’s often useful to review the server log, so as an example, this is how it can be done with GAE’s CLI:
$ gcloud app logs tail -s default
What you’re seeing here is all the COBOL DISPLAY (debug) statements that were emitted by the COBOL/CICS “account” application.
Serverless compute infrastructures can dramatically accelerate your IT and business agility (sorry, Jules).
If you are already muttering sweet phrases of disbelief at the headline, I understand, but hang in there!
The application used is a strict implementation of the TPC-C benchmark that was built for the IBM Mainframe using COBOL, BMS & CICS with a DB2 database. TPC-C is an online transaction processing (OLTP) benchmark that represents any industry that must manage, sell, or distribute a product or service.
With Heirloom on AWS, IBM Mainframe applications that were monolithic, closed and scaled vertically, can be quickly & easily transformed (recompiled) so they are now agile, open and scaled horizontally.
This showcase clearly demonstrates the capability of Heirloom on AWS to deploy and dynamically scale a very large IBM Mainframe OLTP workload, with annual infrastructure cost savings of at least 90%.
The workload is deployed as an application that fully exploits the benefits of the cloud computing delivery model, such as application elasticity (the ability to automatically scale-out and scale-back), high availability (always accessible from anywhere at anytime), and pay-for-use (right-sized capacity for efficient resource utilization).
If your IBM Mainframe is an impediment to the execution of your strategic imperatives, contact us to learn how we can quickly & accurately transform your legacy workloads.
First, we ran the TPC-C application on an IBM Mainframe to establish a baseline of transaction throughput per MIPS.
We then took the 50,000+ lines of the TPC-C application code & screens and compiled them (without any modifications) into 100% Java using the Heirloom SDK Eclipse plugin. The Java code was then packaged as a standard .war file, ready for deployment to any industry standard Java Application Server (such as Apache Tomcat). This process (from starting Eclipse to creating the .war file) can be done in 60 seconds (you can watch that happen in this video).
The .war file was deployed to the Amazon AWS platform described in the picture. The entire system runs inside AWS.
Briefly, the system comprises 5 primary layers:
A valid TPC-C run must strictly adhere to the following primary requirements:
This image is of the 10 terminal drivers (each simulating 2,250 end-users) reporting results at the end of the TPC-C benchmark run. To see a bigger version of the image, right-click and open the image in a new tab.
All terminal drivers run in parallel, with each measuring transaction throughput for 2,250 terminals. These are added up to provide a total MIPS equivalent rating of over 15,200 MIPS.
The application workload (at peak scaling) was distributed over a total of 144 CPU cores (see details in FAQ below), which yields ~105 MIPS per CPU core. This is historically consistent with our client engagements, and a useful “rule of thumb” when looking at initial capacity planning.
Over the duration of the run, approx 7,820,000 end-user transactions were submitted.
7,820,000 / 128 minutes (incl. warmup time) / 60 = 1,018 transactions per second.
These are definitely not micro-transactions, so the transaction rate is mighty impressive. Especially considering the average response time for all transactions after 2 hours was still in the sub-second range.
Benchmarks from vendors are notoriously skewed. Pretty much, worthless.
TPC is an independent organization that has become an industry standard for measuring transaction throughput.
Heirloom is the only platform that automatically refactors mainframe applications (online & batch) so they execute on Java Application Servers while preserving critical business logic, user interfaces, data integrity, and systems security.
The transformed application can continue to be developed in the original host language (COBOL, PL/I, JCL, etc), or in Java, or in any combination. You decide based on your objectives.
Heirloom actually works on multiple clouds such as Pivotal Cloud Foundry, Google Cloud Platform, Microsoft Azure and Red Hat OpenShift, but we have had outstanding support from our partner Amazon in delivering this compelling mainframe-to-cloud showcase.
AWS provides an amazingly agile platform for easily deploying and managing auto-scaling workloads in a secure, reliable & available infrastructure. Powerful software services are aggregated to defined end-points that are seamlessly distributed to physical infrastructure in multiple data centers.
Amazon lists EC2 instance types as having a number of vCPU’s. A vCPU is a virtualized core, not a physical core. However, a reasonable approximation is that 2 vCPU’s is presented from a single (hyperthreaded) physical CPU core.
i.e. 2 vCPU’s = 1 CPU core. We’re going to stick with physical CPU cores from here.
The scalable application layer (i.e. all the Tomcat Java Application Servers) consisted of a maximum of 64 m4x.large instances, each with 2 CPU cores. 128 in total.
The database layer (i.e. Amazon Aurora) was running on a single db.r4.8xlarge with 16 CPU cores.
So, excluding the terminal drivers (which in the real-world would simply be a browser tab on each end-users PC) and the load balancer, we have a system that can scale to a configured maximum of 144 CPU cores.
Reporting tpmC numbers without independent validation from TPC is a bit of a gray area, so we’ve erred on the side of caution and blurred it out. We’ve used an implementation of the TPC-C benchmark (because of its real-world characteristics) for comparative purposes only.
Heirloom can scale batch workloads as well! It provides native support for JCL with its integrated Elastic Batch Platform (EBP) service. It has built-in clustering capabilities and integrates with various scheduling platforms via RESTful interfaces, including another service of Heirloom called Elastic Scheduling Platform (ESP). EBP runs on any standard Java Application Server and so seamlessly integrates with the AWS environment just as easily as the OLTP service.
No. Neither did we tune the AWS environment. It’s certainly possible that tuning the mainframe environment could yield a better improvement than tuning the AWS environment, just as the reverse scenario is also possible. This is where benchmarking can get extremely contentious and extremely expensive. Respectfully, we’re not going there, as our assessment is that it will not fundamentally change the value proposition.
MSU is a consumption-based measure and MIPS is a capacity-based measure, so hard to precisely compare. However, a reasonable “rule of thumb” is if you have a fully-utilized 6,000 MIPS mainframe, you would be consuming approximately 1,000 MSUs (i.e. a ratio of 6:1).
The vast majority of the infrastructure cost resides in the application and database layers. There are other costs such as load balancing and network traffic, but they are not relatively significant.
Let’s make the assumption that we’re running at the maximum configured capacity and 24×365 (which is unlikely). At peak load, we were using 64 m4.xlarge instances in the application layer, and 1 Aurora db.r4.8xlarge instance for the database.
Application layer (m4.xlarge): 64 * $0.20/hour * 24 * 365 = $112,128
Aurora database layer (db.r4.8xlarge): 1 * $4.64/hour * 24 * 365 = $40,646
Let’s add 10% (it’s definitely less than this) to cover other AWS costs. Other than the licensing cost of Heirloom, all the other software is included.
This gives us a total annual cost for the infrastructure of $168,050.
We’re going to use some Gartner data that is in the public domain for this.
In 2009, Gartner figured out the total annual operating cost per IBM Mainframe MIPS was $4,496. In 2012, that number had reduced to $3,566, equivalent to an approximate reduction of 8% annually. Extrapolating that number through 2017 would give us a total operating cost per MIPS of $2,350.
15,200 MIPS * $2,350 = $35,720,000
In 2012, Gartner stated that hardware made up 14% of the total cost, and software made up 44% of the total cost. i.e. 58% of the total.
For 15,200 MIPS, this gives us a total annual cost for the infrastructure of $20,717,600.
That’s a pretty stark contrast to AWS (and this comparison doesn’t even factor in the staffing, automation, and maintenance cost benefits that are heavily in favor of the AWS infrastructure).
There is no indication of any significant constraints with increasing the capacity of the application layer. There’s tons of room to utilize more instances and much larger instance types.
Ultimately, the constraining factor with TPC-C (and OLTP workloads generally) will be the database. We have not yet leveraged the currently largest available Amazon Aurora instance (which is 2X bigger than the one we used in this showcase). From our work creating comparisons with other smaller Aurora instance types, it scales extremely well, so we would expect to see a significant increase in throughput.
We’re also looking forward to utilizing the upcoming Aurora Multi-Master release (which supports scale-out for both reads and writes).
I understand; you may already be skeptical. The application modernization arena has not done itself any favors with years of vendor misdirection and misleading claims (permeating from whitepapers and glossy write-ups that attempt to recast tired proprietary technology as modern & relevant — square pegs in round holes). We encounter that hurdle with every new client. Often, they are exasperated; so we simply show them exactly how we modernize their code using open software and the sense of mistrust quickly evaporates, replaced by the understanding that Heirloom can make their trusted legacy applications, agile. In the same vein, I am going to show you how Heirloom can take a function from a monolithic IBM Mainframe COBOL/CICS application and deploy it to a serverless environment as a microservice (using AWS Lambda coupled with the recent release of AWS Lambda Layers).
In 2018, we worked with Amazon to refactor an industry-standard TPC-C transaction processing benchmark written in COBOL/CICS from the IBM Mainframe to AWS Elastic Beanstalk, delivering 1,018 transactions per second — equivalent to the processing capacity of a large 15,200 MIPS IBM Mainframe — with a dramatically reduced annual infrastructure cost of $365K vs $16M. You can read more about this showcase on Amazon’s APN site.
Beyond instance-oriented infrastructures (like AWS Elastic Beanstalk), are serverless compute/store infrastructures (like AWS Lambda) that deploy discreet functions as microservices.
With serverless computing, you run code without provisioning or managing servers (zero administration effort), required resources are continuously scaled (automatically), and costs are only incurred when your code is running (measured in sub-seconds).
Microservices provide a model for delivering high-quality applications that are agile, scalable, and available.
In the video below, we start with an IBM Mainframe COBOL/CICS application that has been refactored with Heirloom and is now running under a local instance of a Java Application Server (Apache Tomcat). The next steps taken with Heirloom to extract, create and deploy the microservice are:
The combination of these components represents the entirety of the microservice stack. More simply stated, the stack looks like this:
[client] — invoke the microservice [AWS Lambda Service: AccountLimit] — service interface [AWS Lambda Layer: getAccount] — facade and extracted function [AWS Lambda Layer: Heirloom runtime] — Java framework for executing mainframe apps
The Heirloom AWS Lambda runtime layer provides everything you need to deploy microservices derived from your online and batch IBM Mainframe applications. It’s much more than just a language runtime — it’s a mainframe platform (implemented as a Java framework).
In summary, Heirloom can quickly & accurately refactor your IBM Mainframe applications to agile cloud infrastructures like AWS Elastic Beanstalk, Azure App Service, Pivotal Cloud Foundry, Red Hat OpenShift & Google Cloud Platform.
It can also enable & accelerate your transformation from monolithic application architectures to microservices running on serverless computing infrastructures like AWS Lambda.
So far in our “Done In 60 Seconds” series, we have covered application migration (automatically transforming an unmodified Mainframe COBOL/CICS/VSAM application to a Java Application Server & Relational DB) and data migration (migrating a Mainframe VSAM file to a Relational DB without changing the application source).
In this article, we are putting the spotlight on application security. The IBM Mainframe has acquired the reputation of being a highly secure application platform, primarily because of its ability to manage & control access to application-specific resources. These “rules” and “policies” have a considerable impact on prescribed operational processes related to the application workload, and so it is vital that they can be easily replicated on the target platform. In 60 seconds, here’s how it’s done with Heirloom:
With integrated support for user-authentication and resource-authorization in Heirloom, existing rules are extracted from the host system (e.g. RACF) and precisely replicated in any industry-standard LDAP server (including open-source implementations such as Apache DS), without requiring any changes to the application code.
Application security should not (as it often is) be relegated to a sideline consideration during (or even, post) a transformation project. Doing so injects a lot of unnecessary risks, and yet many modernization vendors fail to fully address this critical piece of the puzzle.
Mainframe applications (batch and online) often rely on fine-grained resource-authorization (not just user-authentication), and the transformed application should provide the same controls, without requiring any code changes, to guarantee enforcement of existing security policies via integration with industry-standard directory services.
Finally, because applications transformed with Heirloom are 100% Java, transport-security (secure communications) and platform-security (safe deployment of application resources) is easily achieved via seamless integration with Java Application Servers.
Since we’ve already showcased what we can do with application code & logic, we’re now going to take a look at what Heirloom does for data transformation. Again, it will only take 60 seconds so keep that in mind when you’ve watched the video and taken a breath to consider the benefits of transforming proprietary mainframe data stores into accessible relational databases.
So, what happened? We took a VSAM KSDS file encoded as EBCDIC from the mainframe, analyzed the record structure, and used that XML representation to extract, transform and load the data into a PostgreSQL database table encoded in ASCII. The application was then executed without any changes to the source code (so yes, we were using the applications existing COBOL I/O statements to seamlessly access the relational data).
The application knows nothing of this wonderous outcome and “believes” it is still grinding through a VSAM file that is still blessed with packed decimals & redefined record structures. Heaven. Shhh, we won’t tell if you don’t.
Further, because the data is now in a relational store, we can easily establish views to make the data visible to other applications that need to interrogate the data via SQL.
When migrating mainframe workloads, data is often overlooked along with other areas such as batch processing, security, deployment, cloud, DevOps, UI modernization, and application refactoring. Heirloom is the only platform in the market that fully addresses each of these critical components. Something that we will continue to make clear over the coming weeks. And don’t forget, with Heirloom, migrated workloads are 100% Java deployed to any industry-standard Java Application Server (e.g. Apache Tomcat).
Migrating mainframe workloads to anywhere is hard, right?
You may have seen vendor presentations that promise an assured migration process, led by analysis tools that paint interrelationships between application artifacts that bedazzle (mislead) you into believing that the complexity is well understood.
It’s also blatant vendor misdirection. The hard part is in the migration, not the analysis.
What you are seeing is superficial at best. A “shiny object” that distracts you from the complexity ahead, and one that steers you towards an expensive multi-year services-led engagement that is aligned with the vendors business model, not yours.
Just ask the vendor “where does the application get deployed?”. If the answer is not “any Java Application Server“, you are being quietly led into a dependency on a labyrinthic proprietary black-box that underpins an enforced application software architecture (e.g. MVC). Any assertions that you are now on an agile, open, scalable, performant platform, die right there.
I’m not going to get into an extensive takedown (in this article) of why migration transformation toolsets that are borne of application analyzers are a hugely expensive strategic misstep because I’d like you to spend the next 60 seconds watching how astoundingly fast Heirloom is at transforming mainframe applications to Java.
Need a recap? What you saw was a mainframe COBOL/CICS implementation of the TPC-C benchmark (an application with over 50,000 LOC and 7 BMS screens) being compiled by Heirloom (without any code changes) and deployed to a Java Application Server for immediate execution via a browser. All the data for this application was previously migrated from VSAM (EBCDIC encoded) to an RDBMS (ASCII encoded). In later articles, we’ll demonstrate how Heirloom migrates mainframe batch, data, and security profiles just as quickly.
Although the resulting application is 100% Java (and deployable on-premise or to any cloud), Heirloom provides full support (via Eclipse plug-ins) for on-going development of the application in the host language (COBOL in this example, but PL/I also) or in the target language (i.e. Java), or both. This was done because any transformation is not just about the application artifacts. People are obviously a big part of the IP equation, and securing the engagement of IT staff is essential to ensure a successful transformation. Not just on day 1, but for many years post-deployment.
Graham Cunningham, CTO
Running a proprietary assembler program written over 40 years ago engineers at NASA were able to use the Voyager’s thrusters to replace the altitude correction engine that had degraded over the last 40 years. This extends the lifetime of the voyager 1 probe for another 2 or 3 years.
Is there are a finer example than this that old code is not always bad code? Old code also continues to fulfill vital roles for NASA in the same way that it does for your business.
Just like the incredible continuing value of the assembler code running on Voyager 1 let us take a moment to remember the incredible value of the code living on your mainframe.
Re-purposing hardware and executing decades-old code on it has significantly extended voyage 1’s life expectancy. We can use the same analogy for existing mainframe applications.
If we migrate the application using Heirloom we are changing the hardware environment but keeping the existing code and giving it a new lease of life. This will extend the lifetime of these applications and actually increase their value to your company. Migrated applications do not just run in a new environment, their data, previously hidden away in an EBCDIC silo, suddenly becomes accessible to the rest of the enterprise. Imagine adding decades of experience in the form of your companies data to a big data model designed to generate actionable business insights.
Graham Cunningham, CTO
Reading about Continuous Integration, Continuous Deployment, CI/CD, and unit testing etc all seem a million miles away from daily life on the Mainframe.
In fact, there is a basic question to be answered for all projects, “Why do we need to do continuous integration?”. Agile guru, Martin Fowler puts it best (he usually does) when he says:
Continuous Integration is a software development practice where members of a team integrate their work frequently; usually, each person integrates at least daily… Each integration is verified by an automated build… to detect integration errors as quickly as possible.
Large software projects are plagued with integration issues, developer 1 changes code and breaks developer 2’s code. If you are not following a continuous integration approach this will only be discovered near release, resulting in many late nights for the developers and even more grey hairs for the project owners. It is at this point that coding standards fall precipitously and “hacking” a change in to “make it work” can ensure that the next project delivery starts with, often, severe technical debts. Unless you are the US government this debt will have to be paid resulting in longer release cycles and missing features.
That’s great for Heirloom as a commercial software development company producing a completely automated mainframe workload migration platform but what about our customers?
Well our tooling enables our customer’s mainframe code to fit into industry best practice CI/CD environments and processes just like the one below. Because mainframe code compiled with Heirloom runs on the Java VM we are in the great position that we can utilize all the Java infrastructure that has been built in the last few years to support enterprise application development.
How do we implement this?
Let’s start with the Developer Workstation. Heirloom is delivered as both a development environment and a set of run-time Jar files.
The development environment is an Eclipse Perspective. We add COBOL and PL/1 as fully supported languages to the industry-standard Eclipse development environment.
We can follow a full development cycle here:
Edit …Compile …Debug …Test …Commit
The code being worked on in the image above is a standard CICS application presenting a BMS screen to the user. With Heirloom, BMS screen definitions are automatically transformed into HTML5 templates with the initial template design mimicking the green screen that mainframe users are familiar with. See an earlier post for a typical green screen sample program Mainframe Migration? Why?
The Continuous Build Server that we use runs the Jenkins open source automation server.
All our notifications back to the developers are done using Slack channels.
So what is the process flow?
Heirloom migrates not just your mainframe code to a new platform, the Java VM. It also enables you to transform your developer and integration processes. When you use Heirloom your mainframe projects and developers are now full citizens and can adopt, industry best practices for continuous integration and deployment.
A pre-requisite that many people may have noticed for all this to work is that there is a set of tests that can be run automatically as part of the build and integration process and that is the topic for the next article